Wx Station Queries
Forum rules
These topics are a read-only archive and may be subject to out-of-date information.
For today's weather discussion head to: New Zealand Weather & Climate
These topics are a read-only archive and may be subject to out-of-date information.
For today's weather discussion head to: New Zealand Weather & Climate
- Willoughby
- Site Admin
- Posts: 4433
- Joined: Sat 14/06/2003 16:18
- Location: Darwin, Australia: Storm city
- Has thanked: 264 times
- Been thanked: 288 times
- Contact:
Wx Station Queries
Well i'm about to purchase the Davis Vantage Pro2 wireless from wdu.com.au with the WMO guidelne rain gauge from davis.
(you can't buy from the states as the US wireless stations operate on the same FM frequencies with the Vodafone network (here))
Gary, you suggested something you guys are switching to from Davis... why would this be of interest to me?
And yes Brian.. at this stage i'd be using your weather-display software with some little alterations.. how would I go about web-hosting?
IS it possible to stick a Stevenson screen on top of the house.. will the Davis sensors/radiation shield be enough for accurate temp readings, even if the roof is metallic?
I'd most likely build one myself.. the home-made one on WZ looks cool...
http://shop.weatherzone.com.au/info_pag ... 5189422e5d
Wind mast will be 5 metres high above the roof towards the W'rn end of the house with the S/screen and so on towards the aerial-side of the roof
Attatched is a 360° view from the proposed Hamilton East weather station site!
(you can't buy from the states as the US wireless stations operate on the same FM frequencies with the Vodafone network (here))
Gary, you suggested something you guys are switching to from Davis... why would this be of interest to me?
And yes Brian.. at this stage i'd be using your weather-display software with some little alterations.. how would I go about web-hosting?
IS it possible to stick a Stevenson screen on top of the house.. will the Davis sensors/radiation shield be enough for accurate temp readings, even if the roof is metallic?
I'd most likely build one myself.. the home-made one on WZ looks cool...
http://shop.weatherzone.com.au/info_pag ... 5189422e5d
Wind mast will be 5 metres high above the roof towards the W'rn end of the house with the S/screen and so on towards the aerial-side of the roof
Attatched is a 360° view from the proposed Hamilton East weather station site!
You do not have the required permissions to view the files attached to this post.
-
- Posts: 12305
- Joined: Mon 10/03/2003 16:30
- Location: West Coast Road, Manukau Peninsula, North Island
- Has thanked: 0
- Been thanked: 0
- Contact:
note that the davis VP (i.e the new VP2) has a pretty good built in stevenson screen, and you could even build your own fan into it to improve air flow when there is not much wind...and because the solar charging is on the side of the ISS unit (i.e the whole rain gauge/temp sensor array), then you dont want to put all that into a stevenson screen, but you could extend the temp/hum and ISS from the davis screen to a stevenson screen...i.e the white box with the sealed lid, and the separate temp/hum sensor....thats what i have done at the waikuku site....
the worst thing to watch out for is reflected solar radiation....which can come from places you would not expect ...
re web hosting, you could run a 2nd lower spec pc running linux and then set WD to save the files onto that PC, if you can get samba set up, or just ftp to that pc on a LAN...but i even have a linux verison of WD, which has improved alot of the last year...and i need to work on it more
sounds exciting foggy!!
a forum with lots of information on weather stations, housing/equioment, web hosting, etc:
http://www.weather-watch.com/smf/
you will have to add a 1 wire lightning counter too (only 40$ or so)
the worst thing to watch out for is reflected solar radiation....which can come from places you would not expect ...
re web hosting, you could run a 2nd lower spec pc running linux and then set WD to save the files onto that PC, if you can get samba set up, or just ftp to that pc on a LAN...but i even have a linux verison of WD, which has improved alot of the last year...and i need to work on it more
sounds exciting foggy!!
a forum with lots of information on weather stations, housing/equioment, web hosting, etc:
http://www.weather-watch.com/smf/
you will have to add a 1 wire lightning counter too (only 40$ or so)
- TonyT
- Moderator
- Posts: 2882
- Joined: Thu 08/05/2003 11:09
- Location: Amberley, North Canterbury
- Has thanked: 354 times
- Been thanked: 1152 times
Foggy, FWIW I am using a US model VP2 and also a Vodafone cell phone, and I have no problem with either. YMMV.
As for siting the sensors, if at all possible do not put the temp sensors on a roof. You can get a cable made up (I did) to extend the internal cable from the ISS to the temp sensor, so you can still mount the raingauge and solar panel up high, but the temp sensors at the correct height (1.2-1.5m agl).
As for siting the sensors, if at all possible do not put the temp sensors on a roof. You can get a cable made up (I did) to extend the internal cable from the ISS to the temp sensor, so you can still mount the raingauge and solar panel up high, but the temp sensors at the correct height (1.2-1.5m agl).
-
- Posts: 1054
- Joined: Sun 28/09/2003 21:27
- Location: Grey Lynn, Auckland
- Has thanked: 488 times
- Been thanked: 40 times
- Contact:
5m above the roof height! thats great
I'd say you definately want the screen down at a more standard height in the backyard somewhere away from buidings and paths/walls.. The metal roof will emit a large ammount of radiation when hot and convection will carry up a lot of hot air with no wind..
I see the NIWA monitoring sites have both sensors at around 2m and up on the poles as well..
how long is the iss cable to the wind sensors if you dont have the
separate transmitter? can you split them?
I am going to get VP here too soon so I guess I'll find it all out then
I'd say you definately want the screen down at a more standard height in the backyard somewhere away from buidings and paths/walls.. The metal roof will emit a large ammount of radiation when hot and convection will carry up a lot of hot air with no wind..
I see the NIWA monitoring sites have both sensors at around 2m and up on the poles as well..
how long is the iss cable to the wind sensors if you dont have the
separate transmitter? can you split them?
I am going to get VP here too soon so I guess I'll find it all out then
-
- Posts: 12305
- Joined: Mon 10/03/2003 16:30
- Location: West Coast Road, Manukau Peninsula, North Island
- Has thanked: 0
- Been thanked: 0
- Contact:
-
- Posts: 12305
- Joined: Mon 10/03/2003 16:30
- Location: West Coast Road, Manukau Peninsula, North Island
- Has thanked: 0
- Been thanked: 0
- Contact:
- Willoughby
- Site Admin
- Posts: 4433
- Joined: Sat 14/06/2003 16:18
- Location: Darwin, Australia: Storm city
- Has thanked: 264 times
- Been thanked: 288 times
- Contact:
What does FWIW and YMMV mean?TonyT wrote:Foggy, FWIW I am using a US model VP2 and also a Vodafone cell phone, and I have no problem with either. YMMV.
As for siting the sensors, if at all possible do not put the temp sensors on a roof. You can get a cable made up (I did) to extend the internal cable from the ISS to the temp sensor, so you can still mount the raingauge and solar panel up high, but the temp sensors at the correct height (1.2-1.5m agl).
Anyway sticking the temp sensors and so on on top of the house are the only realistic options for me. Would laying a big layer of astro turf or something help to minimise the effects of the heat build from the roof?
Cheers, thanks for that info Brian and Ricky
-
- Posts: 12305
- Joined: Mon 10/03/2003 16:30
- Location: West Coast Road, Manukau Peninsula, North Island
- Has thanked: 0
- Been thanked: 0
- Contact:
- TonyT
- Moderator
- Posts: 2882
- Joined: Thu 08/05/2003 11:09
- Location: Amberley, North Canterbury
- Has thanked: 354 times
- Been thanked: 1152 times
Well, if its your only option then its your only option, but try seriously to explore any other possibilities - its not just the reflected heat (which will be considerable), its the height above ground level. You wont measure frosts up there, and your daytime maximums will be quite distorted. I respectfully suggest that you will be very disappointed with the results if you do go with roof mounting (for temp). TTFNFoggy Hamilton wrote:Anyway sticking the temp sensors and so on on top of the house are the only realistic options for me.
-
- Posts: 759
- Joined: Wed 03/12/2003 15:44
- Location: Dunedin, NZ
- Has thanked: 0
- Been thanked: 11 times
- Contact:
Try for the open spaces Foggy if you can. I built a wooden Stevenson screen a while ago and kept it beside the house under the deck aboot 3m of the ground.
Now it's out in the open above the grass, aboot 1.3m off the ground and at least 5m away from the nearest tree and 10m away from the nearest concrete structure. I feel a lot more confident that I'm getting accurate readings.
Of course it just added to my partner thinking I'm completely nuts
Now it's out in the open above the grass, aboot 1.3m off the ground and at least 5m away from the nearest tree and 10m away from the nearest concrete structure. I feel a lot more confident that I'm getting accurate readings.
Of course it just added to my partner thinking I'm completely nuts
There is no such thing as bad weather, just the wrong clothes.
- Willoughby
- Site Admin
- Posts: 4433
- Joined: Sat 14/06/2003 16:18
- Location: Darwin, Australia: Storm city
- Has thanked: 264 times
- Been thanked: 288 times
- Contact:
Not much in the way of open spaces on the ground here.. will have to lay some sort of material on the roof.
Brian, I am continually being impressed by the weather-display live feature, and especially the MML! I love the one on ricky's one showing the North Island..
With those wind arrows, can you make them bigger for higher wind speeds, or speed them up?
Still some over-lapping problems on ricky's main live page i've noticed
http://www.portunus.net.nz/weather/live.html
Cheers
Brian, I am continually being impressed by the weather-display live feature, and especially the MML! I love the one on ricky's one showing the North Island..
With those wind arrows, can you make them bigger for higher wind speeds, or speed them up?
Still some over-lapping problems on ricky's main live page i've noticed
http://www.portunus.net.nz/weather/live.html
Cheers
-
- Posts: 12305
- Joined: Mon 10/03/2003 16:30
- Location: West Coast Road, Manukau Peninsula, North Island
- Has thanked: 0
- Been thanked: 0
- Contact:
the stand alone MML is even better foggy...you can add mutliple maps...i.e for zoomed in, or the whole country, etc
and it has barometer too , with the full blown one
note that I am not the author of the live stuff, but the author is always open to ideas and is always improving and adding new stuff... check out the WD forum
and it has barometer too , with the full blown one
note that I am not the author of the live stuff, but the author is always open to ideas and is always improving and adding new stuff... check out the WD forum
-
- Posts: 2363
- Joined: Sun 18/01/2004 18:59
- Location: Omarama
- Has thanked: 0
- Been thanked: 0
Re: Wx Station Queries
Dunno. What did I suggest would be interesting to you? As far as I recall at the time I made any suggestions you hadn't decided upon a station make/model at that point.Foggy Hamilton wrote:Gary, you suggested something you guys are switching to from Davis... why would this be of interest to me?
We have a Davis VP+ which is a good station but we're upgrading to something a lot better for only a little extra, in relative terms. We find the cost of the Davis hard to justify.
Anyway, good luck with it, it'll be great to see data from Hamilton.
- Willoughby
- Site Admin
- Posts: 4433
- Joined: Sat 14/06/2003 16:18
- Location: Darwin, Australia: Storm city
- Has thanked: 264 times
- Been thanked: 288 times
- Contact:
Well it finally arrived today and have it outside on the deck just for preliminary temp/humidity and rain readings for now until it gets fully installed up top.
Not all that impressed by the quality of the wind vane, cups and rain bucket- for that price, but okay...
I noticed weatherdownunder.com.au get sent the product from France where the value is apparently AUD$200
All I just need is UV and solar radiation sensors and broadband!
But that UV one looks REALLY expensive. Is it useful at all to you Brian?
Cheers
Not all that impressed by the quality of the wind vane, cups and rain bucket- for that price, but okay...
I noticed weatherdownunder.com.au get sent the product from France where the value is apparently AUD$200
All I just need is UV and solar radiation sensors and broadband!
But that UV one looks REALLY expensive. Is it useful at all to you Brian?
Cheers
-
- Posts: 12305
- Joined: Mon 10/03/2003 16:30
- Location: West Coast Road, Manukau Peninsula, North Island
- Has thanked: 0
- Been thanked: 0
- Contact:
they are good cups and wind vane, dont worry
although probably not quite as good as a maximum/nrg type
the rain gauge works well, nice and big, so a bigger sampling area
there is a bit of a delay with rain values showing up though
must be like an early xmas though getting it
solar and uv are much cheaper if you get them at the same time
but you can add a cheap 1 wire solar sensor if use the wd software (about 70$ or so), and the lads are working on a 1 wire UV sensor too
ricky even has a night time cloud sensor working (via a labjack)
although probably not quite as good as a maximum/nrg type
the rain gauge works well, nice and big, so a bigger sampling area
there is a bit of a delay with rain values showing up though
must be like an early xmas though getting it
solar and uv are much cheaper if you get them at the same time
but you can add a cheap 1 wire solar sensor if use the wd software (about 70$ or so), and the lads are working on a 1 wire UV sensor too
ricky even has a night time cloud sensor working (via a labjack)
- Willoughby
- Site Admin
- Posts: 4433
- Joined: Sat 14/06/2003 16:18
- Location: Darwin, Australia: Storm city
- Has thanked: 264 times
- Been thanked: 288 times
- Contact:
Are they better than the Davis ones?Manukau heads observer wrote: solar and uv are much cheaper if you get them at the same time
but you can add a cheap 1 wire solar sensor if use the wd software (about 70$ or so), and the lads are working on a 1 wire UV sensor too
ricky even has a night time cloud sensor working (via a labjack)
Where are these 1 wire things?
Thanks
-
- Posts: 2363
- Joined: Sun 18/01/2004 18:59
- Location: Omarama
- Has thanked: 0
- Been thanked: 0
Keep us posted!Foggy Hamilton wrote: Well it finally arrived today and have it outside on the deck just for preliminary temp/humidity and rain readings for now until it gets fully installed up top.
Yup. Hard to justify the expense when the sensors on far less expensive stations were as-good-as-or-better.Not all that impressed by the quality of the wind vane, cups and rain bucket- for that price, but okay...
Yup again...as usual Kiwis are ripped-off on almost all things, and weather stations and software are no different. I used to think NZ$449 for the Oregon Scientific WM-918 (DSE price) was outrageous but we've installed and maintain six of those now and not one has ever had a failure, and the data they provide is more than good enough, especially when our Davis station cost so much more and is not a lot better.I noticed weatherdownunder.com.au get sent the product from France where the value is apparently AUD$200
Oh well, at least the software is excellent and free!
-
- Posts: 12305
- Joined: Mon 10/03/2003 16:30
- Location: West Coast Road, Manukau Peninsula, North Island
- Has thanked: 0
- Been thanked: 0
- Contact:
- Willoughby
- Site Admin
- Posts: 4433
- Joined: Sat 14/06/2003 16:18
- Location: Darwin, Australia: Storm city
- Has thanked: 264 times
- Been thanked: 288 times
- Contact:
-
- Posts: 2363
- Joined: Sun 18/01/2004 18:59
- Location: Omarama
- Has thanked: 0
- Been thanked: 0
The WM-918 cost $449, DSE retail price: the Davis Vantage Pro Plus cost approximately $2,500 (from memory). The Davis sensors aren't $2,000 better than the WM-918 sensors.Manukau heads observer wrote:the davis wind sensor is much better than a wm918 gary, i cant believe you are putting them into the same sentence
So believe what you like Brian.